The Juliet3 is making progress!

Finally with a semi-working workshop and some spare time, we were able to make some progress with our Juliet3. Since this is the very first Juliet3 ever built, we are going slow and thinking at the whole assembly sequence as we go. 

Differences

Juliet3
The Juliet3 next to his predecessor

On the Juliet3 project, I left some parts out, in order to confirm their design while building the first airframe. While these will be ready for the second Juliet3, on this “prototype” I will be using temporary solutions in order to finish it and get to the test flights sooner. 

For instance, the tail and ailerons sheeting are some of these future updates. However, more are coming. In fact I am preparing two different sets of winglets/side force generators to be tested, along with an optional tail servo support. Apart from this, during the build, I was able to spot a couple of design mistakes, now corrected for the next airframes.

Optionals?

Juliet3
Covering the tail

Even though we are aiming at making the Juliet3 construction as simple as possible, to help even the novice builders having a great time with the process, there are a few details that can be tailored to one’s taste and equipment.

As mentioned before, there will be the option to install the elevator (and/or rudder) servo(s) in the tail, for example if using bigger and heavier motor/propeller combos. It will also be possible to choose the landing gear between those commercially available, and the one specifically designed and optimized for the Juliet3, made by us. The tailwheel mount can also accept a variety of commercial units, as well as personal solutions.

Last decisions

Besides all this work, we are left with some decisions to make. Above all, the final livery for the first airframe. In the last couple of weeks I started to poll my friends, and the whole instagram, with several possible color schemes. I still don’t know which one will be chosen, but for sure, you’ll be able to see it in the next update.

Juliet3 liveries
Some of the proposed color combinations

Like this post? share it!

Share on pinterest
Pinterest
Share on facebook
Facebook
Share on email
Email

The materials and components used in this project were bought from:

Any questions?

If you want to know more about this or other projects, just leave a message below and we'll be back to you shortly!

Other posts about Radio-controlled planes:

A1-C Engine cowl

The engine, or in this case, motor cowl, has been first modeled from a solid block using sandpaper… glasses and a mask. Once happy with

Read More »

A1-C The Project

The A1-C project was started in the last century. In the beginning I designed the airframe with my father for a small class .25 glow

Read More »

This website uses cookies to ensure you get the best experience on our website.