
Il primo Juliet3 è pronto!
Dopo una lunga fase di gestazione, il nostro primo short kit e’pronto a spiccare il volo!
Dopo una lunga fase di gestazione, il nostro primo short kit e’pronto a spiccare il volo!
Con fusoliera e ali quasi pronti alla copertura, manca poco ad avere il primo Juliet3!
In seguito ad un piccolo incidente di percorso, abbiamo riparato il Juliet2. Ora è pronto per nuove avventure!!!
With the fuselage and wings almost ready for the covering film, the Juliet3 is coming soon!
After a little incident, we repaired our Juliet2 Prototype and it’s now ready for new adventures!!!
The Durafly Tundra comes with a few extra accessories included in the kit. Besides the floats, there is a nice FPV tray to assemble, and an EPO spacer to install the candy dropper. So after enjoying the Tundra in its “clean” configuration for a while, I’ve decided to try that
Last year ended with the test flights of the Juliet2 prototype, gathering valuable information to help us improve the design. In the beginning of 2020 I finally agreed (with myself) that the design was mature enough to build a first batch of Juliet3 airframes. This meant I could finally move
Previous Next After we cut and tested all the parts several times without glue, it was time to start the A1-D construction. It is very important, with a structure like this, to get the best assembly order and stick to it. There are plenty of slots to align and some parts just
Previous Next The A1-D, or Juliet II project has slowly made progress during the flying season of 2018. But with the arrival of this fall, we started to finally see something shaping on our workbench. And they did it fast. From the screen to the garage I was surprised at